Ask The Expert
The All Seasons team is made up of industry experts in spas, fireplaces, barbecues, and saunas. Following is some insight and ideas from our staff. If you have your own question, please call any of our locations in Southeast Michigan, or send us an email.
Downloadable Guides (in PDF format):
Quick Spa Maintenance
(1) CHLORINE for SPAS:
• Add 2 Tablespoons (2 oz) into spa with jets turned on AFTER using spa.
• Chlorine should be added at least two times a week if spa is not used.
• Leave Jets ON for 15 minutes then turn OFF and put cover back on.
• If Spa is used every day, skip a day if Chlorine level remains too high.
(2) RENEW / SHOCK OUT:
• Add 2 Tablespoons of RENEW once a week.
• This is NOT a sanitizer; it allows the Chlorine to work better and eliminates odors.
(3) STAIN & SCALE DEFENDER:
• Add 2 oz. of SPA DEFENSE once a week.
• This will help eliminate minerals that may build up on the spa.
Water Test Strips:
• Test water once a week and adjust PH & ALKALINITY as needed.
• Use SPA UP to Increase PH/ALK. (May be needed with CITY water)
• Use SPA DOWN to Decrease PH/ALK. (Common with WELL water)
Filters:
• Filters should be removed and cleaned once a month.
• It is best to have extra filters to switch with the existing filters once a month.
• Immediately clean the dirty filters and store in a dry place until the next swap-out.
The above amounts are for spas that hold approximately 500 gallons of water.
Read the back of chemical container for exact dosage and precautions.
|
About Us
